Wilwood Brakes D52 Dual Piston Floater 120-10936-RD
Wilwood Brakes D52 Dual Piston Floater 120-10936-RD Wilwood Brakes D52 Dual Piston Floater 120-10936-RD

Wilwood Brakes D52 Dual Piston Floater 120-10936-RD

$246.99 ea
Model:3031103
Condition: NEW
Availability:
ARRIVING SOON!
Estimated arrival: 12/07/2020 (If Ordered Today)
50 available from WILWOOD ENGINEERING as of 05/04/2020
Fitment:
Supplier has not provided any fitment data for this product.
Shipping Note:Standard Delivery
Qty:

Can't Find your Part?

We'll find it for you. Give us a call at 855.444.6872 and we'll source that discontinued or hard to find part.

Why Choose Us?

No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.

Disclaimer

Muscle Cars & Classics always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.

The D52 caliper is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put and end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track.

D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line. Calipers can be used with most wheels that clear the OE calipers. The rear calipers with 1.25” piston provide 2.46 cubic inches of piston area per caliper, to maintain the original front to rear brake bias and use of the OE master cylinder. D52 Calipers come hardened slide pins.

About Wilwood Engineering

Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.

With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.

Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.

Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.

Downloads:

Download Name File Size
fl220.pdf153.33KB
Mounting Specifications
Mount Side Universal
Mount Type Floating
Mount Center(in) 7.06
Mount Hole Size(in) 0.69
Inlet Thread Size 7/16-20
Mount Height(in) 0.77
Rotor Compatibility
Maximum Rotor Diameter(in) 12.19
Minimum Rotor Diameter(in) 11.00
Minimum Rotor Width (in) 1.19
Rotor Width (in) 1.28
Maximum Rotor Width (in) 1.28
Brake Pad Specifications
Brake Pad Type 1 D52
Total Pad Area (in²) 10
Total Pad Volume (in³) 3.9
Piston Specifications
Piston 1 Bore (in) 2.00
Total Piston Area (in²) 6.28
Piston 2 Bore (in) 2.00
Parts & Accessories
O-Ring Kit 130-11509
Replacement Piston 1 200-10932
Bleed Screw Kit 220-0627
Duty Rating & Material
Weight(Lbs) 5.5
Material Aluminum
Pistons
Piston Area (in²) 6.28
Piston Type Stainless
Dust Boot No
Piston Count 2
Rotor Dimensions
Rotor Width (in) 1.28
Rotor Diameter(in) 12.19
Pad Dimensions
Pad Area (in²) 10
Pad Volume (in³) 3.9
Colors & Finish
Color Red
Finish Red Powder Coat
Mounting
Mount Center(in) 7.06
Mount Side Universal
Mount Type Floating

Write a Review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Ask a question about

Wilwood Brakes D52 Dual Piston Floater 120-10936-RD:
Your Name:


Your Email:


Question: Note: HTML is not translated!

Related Products
Shipped from Canada
No Brokerage or Duties
Canadian Owned
www.canadianperformance.ca 2020