ididit Retrofit 71-76 Impala/Caprice/73-78 Chevy Truck, Tilt Floor Shift, Steel 1520760010

ididit Retrofit 71-76 Impala/Caprice/73-78 Chevy Truck, Tilt Floor Shift, Steel 1520760010

$1,099.79$1,237.99 ea
Model:3097777
Condition: NEW
Availability:
ARRIVING SOON!
Estimated arrival: 12/28/2020 (If Ordered Today)
Fitment:
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
Shipping Note:Oversize 1
Qty:

Can't Find your Part?

We'll find it for you. Give us a call at 855.444.6872 and we'll source that discontinued or hard to find part.

Why Choose Us?

No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.

Disclaimer

Muscle Cars & Classics always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.

ididit's retrofit column is the perfect fit for your Classic GM and does NOT require modification to your original vehicle to install. Simply remove your old column, saving your original under dash mount and floor mount. Utilizing your original installation pieces or Borgeson joints and shafting, install your new steering column in place of the old. Using an adaptor, add an aftermarket wheel and the gripping surface of the new wheel will be in the same location as the original. You can also bolt your original wheel directly to this column, no adaptor required! Upgrade your driving experience with id. Ignition Systems. Forget the key and go keyless with id.PUSH. Replace id.CLASSIC with id.PUSH at no additional cost. Add Part # 1000000063 when ordering your column. Secure your ride and upgrade your ignition to id.PUSH+ for only $540. Add Part # 1000000065 when ordering your column. Get the most elite keyless system on the market with id.TOUCH. An easy upgrade to your ignition for only $740. Add Part # 1000000071 when ordering your column.

  • Retrofit 1971-1976 Impala Caprice/1973-78 Chevy Truck
  • Tilt Floor Shift with id.CLASSIC Ignition
  • Paintable Steel
  • Non-Collapsible
  • Limited Lifetime Warranty
  • Designed with the specific vehicle in-house for a perfect fit
  • Most retrofit columns will fit seamlessly in the original position with no modifications to your vehicle
  • Offers tilt and other modern comforts for your muscle car when there were none
  • Most columns include new floor mounts, wiring adapters, dash mounts, and more to help make the transition from old to new quick & easy
  • Not a stock replacement, it's better

About Ididit

Ididit has been making the finest quality steering columns and related accessories for the hot rod and muscle car enthusiast for the past 30 years and continues to expand on that tradition.

Born out of the American entrepreneurial spirit, ididit emerged out of a small garage in 1986 and has grown into the leading aftermarket steering column manufacturer you see today. ididit has been making the finest quality steering columns and related accessories for the hot rod and muscle car enthusiast for the past 30 years and continues to expand on that tradition. Located in Tecumseh, MI, ididit manufactures top quality, American made steering columns for the automotive aftermarket, as well as steering systems for industrial, commercial and government vehicles. ididit also produces specialty columns for a multitude of applications such as golf carts, ATV/UTV, tow vehicles and driving simulators.

Downloads:

Download Name File Size
ididit_warranty.pdf366.22KB
BasicUniversalTiltInstallInstr.pdf1.56MB
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Years Fitment Notes
Chevrolet C10 Pickup 1973 - 1974 Parts that may be required to install your IDIDIT Steering Column
13/16-36 Spline Gearbox-3000014352 U-Joint -1 48 X 1 DD 3000034940 Vibration Joint - 3/4-DD X 13/16-36 3000459424 Telescoping Shaft - 24"
Chevrolet C10 1976 - 1978
Chevrolet C10 1975 Parts that may be required to install your IDIDIT Steering Column
13/16-36 Spline Gearbox-3000014352 U-Joint -1 48 X 1 DD 3000034940 Vibration Joint - 3/4-DD X 13/16-36 3000459424 Telescoping Shaft - 24"
Chevrolet C20 Pickup 1973 - 1974 Parts that may be required to install your IDIDIT Steering Column
13/16-36 Spline Gearbox-3000014352 U-Joint -1 48 X 1 DD 3000034940 Vibration Joint - 3/4-DD X 13/16-36 3000459424 Telescoping Shaft - 24"
Chevrolet C20 1976 - 1978
Chevrolet C20 1975 Parts that may be required to install your IDIDIT Steering Column
13/16-36 Spline Gearbox-3000014352 U-Joint -1 48 X 1 DD 3000034940 Vibration Joint - 3/4-DD X 13/16-36 3000459424 Telescoping Shaft - 24"
Chevrolet C30 Pickup 1973 - 1974 Parts that may be required to install your IDIDIT Steering Column
13/16-36 Spline Gearbox-3000014352 U-Joint -1 48 X 1 DD 3000034940 Vibration Joint - 3/4-DD X 13/16-36 3000459424 Telescoping Shaft - 24"
Chevrolet C30 1976 - 1978
Chevrolet C30 1975 Parts that may be required to install your IDIDIT Steering Column
13/16-36 Spline Gearbox-3000014352 U-Joint -1 48 X 1 DD 3000034940 Vibration Joint - 3/4-DD X 13/16-36 3000459424 Telescoping Shaft - 24"
Chevrolet Caprice 1971 - 1976
Chevrolet Impala 1971 - 1976
Chevrolet K10 Pickup 1973 - 1974 Parts that may be required to install your IDIDIT Steering Column
13/16-36 Spline Gearbox-3000014352 U-Joint -1 48 X 1 DD 3000034940 Vibration Joint - 3/4-DD X 13/16-36 3000459424 Telescoping Shaft - 24"
Chevrolet K10 1975 - 1978
Chevrolet K20 Pickup 1973 - 1974 Parts that may be required to install your IDIDIT Steering Column
13/16-36 Spline Gearbox-3000014352 U-Joint -1 48 X 1 DD 3000034940 Vibration Joint - 3/4-DD X 13/16-36 3000459424 Telescoping Shaft - 24"
Chevrolet K20 1975 - 1978
Chevrolet K30 Pickup 1973 - 1974 Parts that may be required to install your IDIDIT Steering Column
13/16-36 Spline Gearbox-3000014352 U-Joint -1 48 X 1 DD 3000034940 Vibration Joint - 3/4-DD X 13/16-36 3000459424 Telescoping Shaft - 24"
Chevrolet K30 1977 - 1978
Collapsible No
Rack and Pinion Version No
Turn Signal Switch GM 4 1/4"
Ignition Yes
Neutral Safety Switch No
What Steering Wheel Fits OEM or Aftermarket Wheel w/ Adaptor
Floor Mount OEM
Dash Mount OEM
Wired For Horn Yes
4 Way Flasher Yes
Wiring Adaptor No
Output Shaft Type 1" 48 Spline
Universal Or Retrofit Retrofit
Tube Diameter 2 IN
Warranty Limited (Lifetime)
Finish Paintable Steel
Part Type Steering Column
Length 34.5 IN
Shifter Type Floor
Telescopic Steering Wheel No
Tilt Steering Wheel Yes

Write a Review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Ask a question about

ididit Retrofit 71-76 Impala/Caprice/73-78 Chevy Truck, Tilt Floor Shift, Steel 1520760010:
Your Name:


Your Email:


Question: Note: HTML is not translated!

Related Products
ididit 1962-1966 Chevrolet Chevy II Retrofit 62-66 Nova, Tilt Floor Shift w/Rack, Chrome Plate 1120648020
from $900.99 ea $799.68
11.2%
ididit Universal 28" Tilt Floor Shift, Brushed Aluminum 1030280030
from $1,218.99 ea $1,082.71
11.2%
ididit 1958-1962 Chevrolet Corvette Retrofit 58-62 Corvette, Straight Floor Shift, Black Powder Coat 1010720051
from $767.99 ea $681.92
11.2%
ididit 1947-1954 Chevrolet Truck Retrofit 47-54 Chevy Truck, Tilt Column Shift, Chrome Plate 1130651020
from $1,486.99 ea $1,322.04
11.1%
Shipped from Canada
No Brokerage or Duties
Canadian Owned
www.canadianperformance.ca 2020