Estimated arrival: 10/06/2020 (If Ordered Today)
Out of stock at WILWOOD ENGINEERING as of 09/24/2020
Supplier has not provided any fitment data for this product.
|Shipping Note:||Standard Delivery|
We'll find it for you. Give us a call at 855.444.6872 and we'll source that discontinued or hard to find part.
No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.
Muscle Cars & Classics always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.
AERO6/QS-ST six piston radial mount calipers are coupled with the high cooling capacity of 14.00” dynamically mounted GT directional vane rotors to provide the ultimate brake package for unrestricted road race competition. Thermlock pistons in the calipers resist fade and extend service life by reducing the heat transfer from the pads, caliper body, fluid, and seals. New design AERO6/QS-ST (Thick Pad) calipers with 20mm thick pads increase endurance with longer pad life. Rotors mount to the hubs with forged aluminum hats and radial mount brackets secure the caliper to the spindle in the OE location without modification. Kits also include high temperature, high friction race compound pads and all premium grade fasteners.
Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.
With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.
Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.
Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.
|Download Name||File Size|
|Parts & Accessories / Caliper Parts|
|Wear Plate - Left Hand||300-5876|
|Replacement Piston 1||200-7553|
|Replacement Piston 2||200-7556|
|Wear Plate - Right Hand||300-5876|
|Bleed Screw Kit||220-0627|
|Replacement Piston 3||200-7556|
|Kit Components & Specs / Rotor Hats|
|Hat - Part No||170-13170|
|Type||Big Brake Dynamic Bobbin Mount Hat - Short Offset|
|Finish Color||Type III Anodize|
|Hat Offset Dimension (in)||0.290|
|Bolt Circle 1||5 x 4.75|
|Stud Diameter - BC 1||0.520|
|Stud Diameter - BC 2||0.000|
|Stud Diameter - BC 3||0.000|
|Kit Components & Specs / Rotors|
|Left Hand - Part No||160-8399|
|Right Hand - Part No||160-8398|
|Type||GT 72 Curved Vane|
|Outside Diameter (in)||14.00|
|Vane Count||72 CV|
|Parts & Accessories / Hat|
|Parts & Accessories / *Brake Lines Needed|
|Front Line Kit||220-8176, 220-9100|
|Spindle Type||Factory Disc Spindle|
|Caliper Type||6 - Nickel Plate|
|Min Wheel Diameter Req'd*||18|
|Kit Components & Specs / Calipers|
|Piston 3 Bore (in)||1.12|
|Right Hand - Part No||120-13299-N|
|Finish Color||Nickel Plate|
|Piston 1 Bore (in)||1.62|
|Piston 2 Bore (in)||1.12|
|Piston Area (In²)||4.04|
|Brake Pad Plate||6620|
|Brake Pad Area (In²)||11.1|
|Brake Pad Volume (In³)||6.6|
|Left Hand - Part No||120-13300-N|
Note: HTML is not translated!
Rating: Bad Good