Wilwood Brakes AERO6 Big Brake Front Brake Kit (Race) 140-14557
Wilwood Brakes AERO6 Big Brake Front Brake Kit (Race) 140-14557 Wilwood Brakes AERO6 Big Brake Front Brake Kit (Race) 140-14557 Wilwood Brakes AERO6 Big Brake Front Brake Kit (Race) 140-14557 Wilwood Brakes AERO6 Big Brake Front Brake Kit (Race) 140-14557 Wilwood Brakes AERO6 Big Brake Front Brake Kit (Race) 140-14557

Wilwood Brakes AERO6 Big Brake Front Brake Kit (Race) 140-14557

$2,595.99 ea
Model:3924702
Condition: NEW
Availability:
ARRIVING SOON!
Estimated arrival: 10/07/2020 (If Ordered Today)
Out of stock at WILWOOD ENGINEERING as of 05/04/2020
Fitment:
Select a Vehicle or refer to the Vehicle Fitment Tab below to verify that this part fits your vehicle.
Shipping Note:Standard Delivery
Qty:

Can't Find your Part?

We'll find it for you. Give us a call at 855.444.6872 and we'll source that discontinued or hard to find part.

Why Choose Us?

No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.

Disclaimer

Muscle Cars & Classics always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.

AERO6R six piston radial mount calipers are coupled with the high cooling capacity of 14.00" Spec37 GT series directional vane rotors to provide consistent, high response braking for spec category road course cars, intermediate level track event cars, and all levels of auto-cross. This version of the AERO6R caliper uses a forged aluminum body with a black anodized finish, and a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Stainless steel pistons provide corrosion free, long wearing service life with reduced heat transfer as compared to the aluminum and steel pistons used in many OE calipers. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series directional vane rotors are mounted to the OE hubs with weight saving forged aluminum hats. Mounting brackets, including all premium grade fasteners, secure the calipers to the uprights in the stock location with no modifications required. This system is completed with high temperature, high friction, race compound pads selected specifically by application for exceptional driver control, especially when DOT rated tires are in play, or the absence of additional down force aero-body work can marginalize traction. Installation requires the separate purchase of the stainless steel braided flexline kit that must be ordered according to the model year.

Fitment Notes

1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
2. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

About Wilwood Engineering

Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.

With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.

Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.

Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.

Downloads:

Download Name File Size
ds1229.pdf455.96KB
The Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.
Make Model Submodel Years Fitment Notes
Cadillac XLR 2004 - 2009 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
Chevrolet Corvette 427 2013 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
Chevrolet Corvette Base 2009 - 2013 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
Chevrolet Corvette Base 2005 - 2008 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
C-6 - Base
Chevrolet Corvette Grand Sport 2010 - 2013 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
Chevrolet Corvette Z06 Carbon 2011 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
Chevrolet Corvette Z06 2009 - 2013 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
Chevrolet Corvette Z06 2006 - 2008 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
C-6-Z06 Models
Chevrolet Corvette ZR1 2009 - 2013 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
Chevrolet Corvette 1997 - 2004 KIT,FRONT,AERO6,C5/C6 VETTE,97-13,14.00 FIXED MT ROTOR,GT,SPEC ROAD RACE; RTR:14.00-IN DIA, GT 72 CURVED VANE, SLOTTED; CLPR:AERO6, 6-PISTON, BLACK ANODIZE
Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
C-5 & Z06 Models
Details
Part Type Disc Brake Caliper / Rotor / Pad Kit
Parts & Accessories / Caliper Parts
Wear Plate - Left Hand 300-5876
O-ring Kit 130-5972
Replacement Piston 1 200-7519
Replacement Piston 2 200-7513
Wear Plate - Right Hand 300-5876
Bleed Screw Kit 220-0627
Replacement Piston 3 200-7513
Kit Components & Specs / Rotor Hats
Type Big Brake Hat - Short Offset
Material Aluminum
Finish Color Black E-Coat
Hat Offset Dimension (in) 0.290
Bolt Circle 1 5 X 4.50
Bolt Circle 2 5 X 4.75
Stud Diameter - BC 1 0.520
Stud Diameter - BC 2 0.520
Stud Diameter - BC 3 0.000
Hat - Part No 170-8919
Parts & Accessories / Hat
Bolt Kit 230-8008
Parts & Accessories / *Brake Lines Needed
Front Line Kit 220-8176, 220-9100
Spindle Type Factory Disc Spindle
Mount Type Radial
Caliper Type 6 - Black Anodize
Rotor Diameter 14.00
Min Wheel Diameter Req'd* 18
Kit Components & Specs / Calipers
Piston 3 Bore (in) 1.12
Pad Compound BP-30
Right Hand - Part No 120-13291
Type AERO6
Finish Color Black Anodize
Piston Count 6
Piston 1 Bore (in) 1.62
Piston 2 Bore (in) 1.12
Piston Area (In²) 4.04
Piston Type Stainless
Mount Type Radial
Brake Pad Plate 6620
Brake Pad Area (In²) 11.1
Brake Pad Volume (In³) 6.6
Left Hand - Part No 120-13292
Kit Components & Specs / Rotors
Left Hand - Part No 160-8399
Right Hand - Part No 160-8398
Type GT 72 Curved Vane
Style GT Slotted
Surface Finish Plain
Material Spec-37 Iron
Outside Diameter (in) 14.00
Width (in) 1.25
Vane Count 72 CV
Design Type GT
Bedded No
Dynamically Balanced Yes

Write a Review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Ask a question about

Wilwood Brakes AERO6 Big Brake Front Brake Kit (Race) 140-14557:
Your Name:


Your Email:


Question: Note: HTML is not translated!

Related Products
Shipped from Canada
No Brokerage or Duties
Canadian Owned
www.canadianperformance.ca 2020