Estimated arrival: 09/30/2020 (If Ordered Today)
Out of stock at WILWOOD ENGINEERING as of 05/04/2020
Supplier has not provided any fitment data for this product.
|Shipping Note:||Standard Delivery|
We'll find it for you. Give us a call at 855.444.6872 and we'll source that discontinued or hard to find part.
No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.
Muscle Cars & Classics always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.
AERO6 WCCB Carbon-Ceramic Rotor Front Brake Kits offer an extreme performance upgrade featuring WCCB Carbon-Ceramic Dynamic Mount Rotors with Wilwood’s exclusive Bobbin Mounting System. AERO6 WCCB kits are engineered to maximize braking capacity inside custom wheels. These brake kits offer a simple bolt-on installation with minor modifications required to the front spindle only and are fully compatible with ABS and OE master cylinder output. W6AR calipers are a competition proven and offer fully detail machined forged caliper body demonstrates superior strength and resistance to deflection and separation under high load. A high temperature, fluid resistant “Quick-Silver“ Nickel plate is the standard for performance, other colors (Black and Red powder coat) are available as options. 14.00” WCCB rotors are made from a proprietary blend ceramic matrix composite material commonly known as Carbon-Ceramic and dynamically using Wilwood’s proprietary integrated anti-rattle Bobbin Mounting System. WCCB rotors offer higher thermal conductivity and heat capacity in excess of conventional iron or titanium rotors of similar or even greater weight and have been developed to withstand extreme temperatures with the highest possible degree of resistance against distortion, warping, cracking and wear.
Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.
With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.
Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.
Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.
|Download Name||File Size|
|(Increase / Decrease Track Width)|
|Spindle Type||Factory Disc Spindle|
|Caliper Type||6 - Black Powder Coat|
|Min Wheel Diameter Req'd*||18|
|Kit Components & Specs / Rotor Hats|
|Bolt Circle 1||5 x 4.75|
|Stud Diameter - BC 1||0.520|
|Stud Diameter - BC 2||0.000|
|Stud Diameter - BC 3||0.000|
|Hat Offset Dimension (in)||1.740|
|Hat - Part No||170-13136|
|Type||Big Brake Dynamic Bobbin Mount Hat - Flared Bell|
|Finish Color||Type III Anodize|
|Parts & Accessories / Caliper Parts|
|Replacement Piston 1||200-7519|
|Replacement Piston 2||200-7513|
|Wear Plate - Left Hand||300-5876|
|Wear Plate - Right Hand||300-5876|
|Bleed Screw Kit||220-0627|
|Replacement Piston 3||200-7513|
|Parts & Accessories / Hat|
|OE Hub Offset||+.38|
|Kit Components & Specs / Hubs|
|Hub - Part No||270-7037|
|Type||Hub - Hat Mount|
|Bolt Circle 1||5 x 4.50|
|Bolt Circle 2||5 x 4.75|
|Stud Diameter - BC 1||1/2-20|
|Stud Diameter - BC 2||1/2-20|
|Parts & Accessories / *Brake Lines Needed|
|Front Line Kit||220-7056|
|Kit Components & Specs / Calipers|
|Piston 3 Bore (in)||1.12|
|Right Hand - Part No||120-13289-BK|
|Finish Color||Black Powder Coat|
|Piston 1 Bore (in)||1.62|
|Piston 2 Bore (in)||1.12|
|Piston Area (In²)||4.04|
|Brake Pad Plate||6617|
|Brake Pad Area (In²)||11.1|
|Brake Pad Volume (In³)||5.2|
|Left Hand - Part No||120-13290-BK|
|Parts & Accessories / Hub|
|Kit Components & Specs / Rotors|
|Right Hand - Part No||160-12442|
|Left Hand - Part No||160-12442|
|Outside Diameter (in)||14.00|
|Vane Count||24 V|
Note: HTML is not translated!
Rating: Bad Good