Wilwood Brakes DH4 Dual Hydraulic 120-8476
Wilwood Brakes DH4 Dual Hydraulic 120-8476 Wilwood Brakes DH4 Dual Hydraulic 120-8476

Wilwood Brakes DH4 Dual Hydraulic 120-8476

$133.99 ea
Model:3924460
Condition: NEW
Availability:
ARRIVING SOON!
Estimated arrival: 10/06/2020 (If Ordered Today)
Out of stock at WILWOOD ENGINEERING as of 05/04/2020
Fitment:
Supplier has not provided any fitment data for this product.
Shipping Note:Standard Delivery
Qty:

Can't Find your Part?

We'll find it for you. Give us a call at 855.444.6872 and we'll source that discontinued or hard to find part.

Why Choose Us?

No Brokerage or Duties - Canadian Owned & Operated - Shipped from Canada to your Door - Easy to Navigate Website - Access to New, Used & Discontinued Parts - Full Time Staff to Answer your Questions.

Disclaimer

Muscle Cars & Classics always recommends professional installation of our products. Buyer assumes risk of damage caused by improper installation.

Wilwood’s DH4, Dual Hydraulic Calipers offers a step bore piston with a unique primary braking circuit and an additional isolated secondary hydraulic actuated parking brake. Primary piston bore is 1.50” inches, secondary is .94 “diameter and is further isolated with dual 10mm x 1.00 fluid inlets. Designed for rotors no larger 9.00” diameter and .19” width. DH4 caliper feature a floating, single piston design with 3.38” wide slide pin mounting. The DH4’s Low squeeze version use a modified seal design to maximize piston retraction in applications where low drag is paramount. Calipers are supplied without brackets. Additional steel brackets are available.

About Wilwood Engineering

Wilwood Engineering designs and manufactures high-performance disc brake systems. Since the company’s inception in 1977 by Bill Wood, we have developed a substantial matrix of brake components and engineering techniques that allow us to quickly and reliably create brake systems for almost any application. Our core ability is the rapid development of custom engineered brake systems using a combination of off-the-shelf and custom components. In addition to designing and manufacturing brakes for all types of competitive motor sports, Wilwood also manufactures brake systems and components for agricultural equipment, industrial applications, utility vehicles, snowmobiles, quads, motorcycles and military vehicles.

With headquarters in Camarillo, California, Wilwood employs approximately 250 people. We have on-shelf stock of more than 300 different brake calipers, 200 rotor designs, 100 master cylinder designs and a wide assortment of brackets, fittings, valves and brake lines. Our off-shelf brake calipers range in size from tiny calipers used on go-carts and light duty industrial equipment, to heavy duty original equipment brakes for the U.S. military Humvee.

Wilwood's engineering department uses the latest computer-aided design and manufacturing techniques in conjunction with finite element analysis, dynamic test and cycle test equipment, to find high-performance and reliability solutions for the most difficult braking tasks. Our extensive inventory of proprietary on-the-shelf components allow us to provide cost-effective solutions for unique brake applications.

Wilwood is ISO 9000 compliant and has extensive experience maintaining quality levels of 100ppm or less for original equipment manufacturers.

Mounting Specifications
Mount Side Universal
Mount Type Floating
Mount Center(in) 3.38
Mount Hole Size(in) 0.00
Inlet Thread Size M10 x 1.00
Mount Height(in) 0.03
Rotor Compatibility
Maximum Rotor Diameter(in) 9.00
Minimum Rotor Diameter(in) 9.00
Minimum Rotor Width (in) 0.19
Rotor Width (in) 0.19
Maximum Rotor Width (in) 0.19
Brake Pad Specifications
Brake Pad Type 1 4508
Total Pad Area (in²) 1.99
Total Pad Volume (in³) 0.33
Piston Specifications
Piston 1 Bore (in) 1.50
Total Piston Area (in²) 1.77
Parts & Accessories
O-Ring Kit 130-10536
Replacement Piston 1 200-7773
Bleed Screw Kit 220-4269
Duty Rating & Material
Weight(Lbs) 1.3
Material Aluminum
Pistons
Piston Area (in²) 1.77
Piston Type Aluminum
Dust Boot Yes
Piston Count 1
Rotor Dimensions
Rotor Width (in) 0.19
Rotor Diameter(in) 9.00
Pad Dimensions
Pad Area (in²) 1.99
Pad Volume (in³) 0.33
Colors & Finish
Color Clear
Finish Clear Anodize
Mounting
Mount Center(in) 3.38
Mount Side Universal
Mount Type Floating

Write a Review

Your Name:

Your Review:

Note: HTML is not translated!

Rating: Bad Good

Ask a question about

Wilwood Brakes DH4 Dual Hydraulic 120-8476:
Your Name:


Your Email:


Question: Note: HTML is not translated!

Related Products
Shipped from Canada
No Brokerage or Duties
Canadian Owned
www.canadianperformance.ca 2020